Configuring Radius Accounting Servers - 3Com 5500-EI PWR Install Manual

Create a RADIUS scheme and
enter its view
Set the IP address and port
number of the primary RADIUS
authentication/authorization
server
Set the IP address and port
number of the secondary
RADIUS
authentication/authorization
server
The authentication response sent from the RADIUS server to the RADIUS client carries
authorization information. Therefore, you need not (and cannot) specify a separate RADIUS
authorization server.
In an actual network environment, you can specify one server as both the primary and secondary
authentication/authorization servers, as well as specifying two RADIUS servers as the primary and
secondary authentication/authorization servers respectively.
The IP address and port number of the primary authentication server used by the default RADIUS
scheme "system" are 127.0.0.1 and 1645.

Configuring RADIUS Accounting Servers

Follow these steps to configure RADIUS accounting servers:
To do...
Enter system view
Create a RADIUS
scheme and enter its
view
Set the IP address and
port number of the
primary RADIUS
accounting server
Set the IP address and
port number of the
secondary RADIUS
accounting server
radius scheme
radius-scheme-name
primary authentication
ip-address [ port-number ]
secondary authentication
ip-address [ port-number ]
Use the command...
system-view
radius scheme
radius-scheme-name
primary accounting
ip-address [ port-number ]
secondary accounting
ip-address [ port-number ]
2-12
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Required
By default, the IP address and
UDP port number of the
primary server are 0.0.0.0 and
1812 respectively for a newly
created RADIUS scheme.
Optional
By default, the IP address and
UDP port number of the
secondary server are 0.0.0.0
and 1812 respectively for a
newly created RADIUS
scheme.
Remarks
—
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.
Required
By default, the IP address and UDP port
number of the primary accounting server
are 0.0.0.0 and 1813 for a newly created
RADIUS scheme.
Optional
By default, the IP address and UDP port
number of the secondary accounting
server are 0.0.0.0 and 1813 for a newly
created RADIUS scheme.