3Com 5500-EI PWR Install Manual page 988

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

To do...
Configure the source IP
address
Configure the source
port
Configure the test type
Configure the number
of probes per test
Configure a test
description
Configure the
maximum number of
history records that can
be saved
Enable history record
Configure the retaining
time of history record
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the retaining
time of statistics
information
Configure test start
time and lifetime
Enable routing table
bypass
Configure the TTL
Configure the
automatic test interval
Configure the probe
timeout time
Use the command...
source-ip ip-address
source-port port-number
test-type ftp
count times
description string
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time
keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
1-9
Remarks
Required
By default, no source IP address is
configured.
Optional
By default, no source port is configured.
Required
By default, the test type is ICMP.
Optional
By default, each test makes one probe.
Optional
By default, no description information is
configured.
Optional
By default, the maximum number is 50.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history
record is 120 minutes.
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime
is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, TTL is 20.
The sendpacket passroute command
voids the ttl command.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, a probe times out in three
seconds.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents