3Com 5500-EI PWR Install Manual page 999

To do...
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Configure the source IP
address
Configure the test type
Configure the number of
probes per test
Configure a test description
Configure the maximum
number of history records that
can be saved
Enable history record
Configure the retaining time of
history record
Configure statistics interval and
the maximum number of
retained statistics information
Configure the retaining time of
statistics information
Configure test start time and
lifetime
Enable routing table bypass
Configure the TTL
Use the command...
remote-ping-agent enable
remote-ping
administrator-name operation-
tag
source-ip ip-address
test-type dns
count times
description string
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
1-20
Remarks
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.
Optional
By default, no source IP
address is specified.
Required
By default, the test type is
ICMP.
Optional
By default, one probe is made
per test.
Optional
By default, no description
information is configured.
Optional
By default, the maximum
number is 50.
Optional
By default, history record is not
enabled.
Optional
By default, the retaining time of
history record is 120 minutes.
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.
Optional
By default, the retaining time of
statistics information is 120
minutes.
Optional
By default, no test start time
and lifetime is configured.
Optional
By default, routing table bypass
is disabled.
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl
command.