Console Port Login Configurations For Different Authentication Modes - 3Com 5500-EI PWR Install Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

Configuration
The change to console port configuration takes effect immediately, so the connection may be
disconnected when you log in through a console port and then configure this console port. To configure
a console port, you are recommended to log in to the switch in other ways. To log in to a switch through
its console port after you modify the console port settings, you need to modify the corresponding
settings of the terminal emulation utility running on your PC accordingly in the dialog box shown in
Figure
2-4.

Console Port Login Configurations for Different Authentication Modes

Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
None
Password
Set the maximum
Optional
number of lines the
By default, the screen can contain up to 24 lines.
screen can contain
Optional
Set history
command buffer
By default, the history command buffer can contain up
size
to 10 commands.
Optional
Set the timeout time
of a user interface
The default timeout time is 10 minutes.
Console port login configuration
Perform
Perform common
common
configuration for console
configuration
port login
Configure the
Configure the password for
password
local authentication
Perform
Perform common
common
configuration for console
configuration
port login
Remarks
2-4
Remarks
Optional
Refer to
Table
2-2.
Required
Optional
Refer to
Table
2-2.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents