3Com 5500-EI PWR Install Manual page 998

To do...
Configure a test
description
Enable history record
Configure the
retaining time of
history record
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the
retaining time of
statistics information
Configure test start
time and lifetime
Enable routing table
bypass
Configure the TTL
Configure the
automatic test interval
Configure the probe
timeout time
Configure the service
type
Start the test
Display test results
9) Configuring DNS test on remote-ping client
Follow these steps to configure DNS test on remote-ping client:
To do...
Enter system view
Use the command...
description string
history-record enable
history keep-time
keep-time
statistics { interval interval |
max-group number }
statistics keep-time
keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now }
lifetime lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
test-enable
display remote-ping
results [ admin-name
operation-tag ]
Use the command...
system-view
1-19
Remarks
Optional
By default, no description information is
configured.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history
record is 120 minutes.
Optional
By default, statistics interval is 120 minutes
and up to two pieces of statistics
information can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime is
configured.
Optional
By default, routing table bypass is disabled.
Optional
By default, TTL is 20.
The sendpacket passroute command voids
the ttl command.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic test
will be made.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the service type is zero.
Required
Required
The display command can be executed in
any view.
Remarks
—