Displaying And Maintaining Rip Configuration; Rip Configuration Example - 3Com 5500-EI PWR Install Manual

Displaying and Maintaining RIP Configuration

Display the current RIP running status and
configuration information
Display RIP interface information
Display RIP routing information
Reset the system configuration related to RIP

RIP Configuration Example

Network requirements
A small-sized company requires that any two nodes in its small office network communicate with each
other, and that the network devices automatically adapt themselves to any topology change so as to
reduce the work of manual maintenance.
In this case, RIP can implement communication between any two nodes.
Network diagram
According to the network requirements, the network topology is designed as shown in
Figure 3-1 Network diagram for RIP configuration
Device
Switch A
Switch C
To do...
Interface IP address
Vlan-int1 110.11.2.1/24
Vlan-int2 155.10.1.1/24
Vlan-int1 110.11.2.3/24
Vlan-int4 117.102.0.1/16
Use the command...
display rip
display rip interface
display rip routing
reset
Device Interface
Switch B Vlan-int1
Vlan-int3
3-11
Remarks
Available in any
view
Available in RIP
view
Figure 3-1.
IP address
110.11.2.2/24
196.38.165.1/24