Configuring An Address Allocation Mode For An Interface Address Pool - 3Com 5500-EI PWR Install Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

To improve security and avoid malicious attack to the unused sockets, S5500-EI Ethernet switches
provide the following functions:
UDP port 67 and UDP port 68 ports used by DHCP are enabled only when DHCP is enabled.
UDP port 67 and UDP port 68 ports are disabled when DHCP is disabled.
The corresponding implementation is as follows:
After a DHCP interface address pool is created by executing the dhcp select interface command,
UDP port 67 and UDP port 68 ports used by DHCP are enabled.
After a DHCP interface address pool is deleted by executing the undo dhcp select interface
command and all other DHCP functions are disabled, UDP port 67 and UDP port 68 ports used by
DHCP are disabled accordingly.

Configuring an Address Allocation Mode for an Interface Address Pool

IP addresses of an interface address pool can be statically bound to DHCP clients or dynamically
allocated to DHCP clients.
Configuring the static IP address allocation mode
Some DHCP clients, such as WWW servers, need fixed IP addresses. This is achieved by binding IP
addresses to the MAC addresses of these DHCP clients. When such a DHCP client applies for an IP
address, the DHCP server finds the IP address corresponding to the MAC address of the DHCP client,
and then assigns the IP address to the DHCP client.
When some DHCP clients send DHCP-DISCOVER packets to the DHCP server to apply for IP
addresses, they construct client IDs and add them in the DHCP-DISCOVER packets. The DHCP server
finds the corresponding IP addresses based on the client IDs and assigns them to the DHCP clients.
Follow these steps to configure the static IP address allocation mode:
To do...
Enter system view
Enter interface view
Configure static binding
Use the command...
system-view
interface interface-type
interface-number
dhcp server static-bind ip-address
ip-address { client-identifier
client-identifier | mac-address
mac-address }
2-17
Remarks
Required
By default, static
binding is not
configured.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents