Tearing Down User Connections Forcibly; Displaying And Maintaining Aaa - 3Com 4510G Configuration Manual

management of user attributes for the local users in the group. Currently, you can configure password
control attributes and authorization attributes for a user group.
By default, every newly added local user belongs to the user group of system and bears all attributes
of the group. User group system is automatically created by the device.
Follow these steps to configure the attributes for a user group:
To do...
Enter system view
Create a user group and enter user
group view
Configure the authorization
attributes for the user group

Tearing down User Connections Forcibly

Follow these steps to tear down user connections forcibly:
To do...
Enter system view
Tear down AAA user
connections forcibly

Displaying and Maintaining AAA

To do...
Display the configuration
information of a specified ISP
domain or all ISP domains
Display information about
specified or all user connections
Use the command...
system-view
user-group group-name
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut minute |
level level | user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
Use the command...
system-view
cut connection { access-type
{ dot1x | mac-authentication }
| all | domain isp-name |
interface interface-type
interface-number | ip
ip-address | mac mac-address
| ucibindex ucib-index |
user-name user-name | vlan
vlan-id } [ slot slot-number ]
Use the command...
display domain [ isp-name ]
display connection [access-type
{ dot1x | mac-authentication } |
domain isp-name | interface
interface-type interface-number | ip
ip-address | mac mac-address |
ucibindex ucib-index | user-name
user-name | vlan vlan-id ] [ slot
slot-number ]
1-21
Remarks
—
Required
Optional
By default, no
authorization
attribute is
configured for a
user group.
Remarks
—
Required
Applies to only LAN access
user connections at present
Remarks
Available in any view
Available in any view