Displaying And Maintaining Information Center - 3Com 5500-EI PWR Install Manual

To do...
Enable information
output to the SNMP NMS
Configure the output
rules of system
information
Set the format of time
stamp in the output
information
To send information to a remote SNMP NMS properly, related configurations are required on both the
switch and the SNMP NMS. For the detailed configuration, refer to the SNMP-RMON part.

Displaying and Maintaining Information Center

Display information on an information
channel
Display the operation status of
information center, the configuration of
information channels, the format of time
stamp and the information output in
case of fabric
Display the status of log buffer and the
information recorded in the log buffer
Display the summary information
recorded in the log buffer
Display the status of trap buffer and the
information recorded in the trap buffer
Clear information recorded in the log
buffer
Clear information recorded in the trap
buffer
Use the command...
info-center snmp channel
{ channel-number |
channel-name }
info-center source { modu-name |
default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log | trap
| debugging } { boot | date |
none }
To do...
Optional
By default, the switch outputs trap
information to SNMP through
channel 5.
Optional
Refer to
output rules of system information.
Optional
By default, the time stamp format
of the information output to the
SNMP NMS is date.
Use the command...
display channel [ channel-number |
channel-name ]
display info-center [ unit unit-id ]
display logbuffer [ unit unit-id ]
[ level severity | size buffersize ]* [ |
{ begin | exclude | include }
regular-expression ]
display logbuffer summary [ level
severity ]
display trapbuffer [ unit unit-id ]
[ size buffersize ]
reset logbuffer [ unit unit-id ]
reset trapbuffer [ unit unit-id ]
1-14
Remarks
Table 1-4 for the default
Remarks
Available in any
view
Available in user
view