3Com 5500-EI PWR Install Manual page 11

Available
View
operation
Configure OSPF
OSPF view protocol
parameters
OSPF area Configure OSPF
view area parameters
Routing policy Configure routing
view policy
Define rules for a
Basic ACL basic ACL (with ID
view ranging from 2000
to 2999)
Define rules for an
Advanced advanced ACL
ACL view (with ID ranging
from 3000 to 3999)
Define rules for an
Layer 2 ACL layer 2 ACL (with
view ID ranging from
4000 to 4999)
Define rules for a
User-defined user-defined ACL
ACL view (with ID ranging
from 5000 to 5999)
QoS profile
Define QoS profile
view
Configure RADIUS
RADIUS
scheme
scheme view
parameters
ISP domain Configure ISP
view domain parameters
Remote-ping Configure
test group remote-ping test
view group parameters
Configure
HWTACACS
HWTACACS
view
parameters
Prompt example
Execute the ospf
[Sysname-ospf-1] command in
system view.
Execute the area
[Sysname-ospf-1-
command in OSPF
area-0.0.0.1]
view.
Execute the
[Sysname-route-p route-policy
olicy] command in
system view.
Execute the acl
[Sysname-acl-
number command
basic-2000]
in system view.
Execute the acl
[Sysname-acl-adv-
number command
3000]
in system view.
Execute the acl
[Sysname-acl-ethe
number command
rnetframe-4000]
in system view.
Execute the acl
[Sysname-acl-user
number command
-5000]
in system view.
Execute the
[Sysname-qos-pro qos-profile
file-a123] command in
system view.
Execute the radius
[Sysname-radius-1
scheme command
]
in system view.
Execute the
[Sysname-isp-aaa
domain command
123.net]
in system view.
Execute the
[Sysname-remote- remote-ping
ping-a123-a123] command in
system view.
Execute the
[Sysname-hwtaca hwtacacs scheme
cs-a123] command in
system view.
1-10
Enter method Quit method
Execute the
quit command
to return to
OSPF view.
Execute the
return
command to
return to user
view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.