Displaying Web Cache Redirection Configuration; Web Cache Redirection Configuration Example - 3Com 5500-EI PWR Install Manual

Follow these steps to configure Web cache redirection in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Configure Web cache
server parameters
Quit to system view
Specify a VLAN whose
HTTP traffic is to be
redirected to the Web cache
server
Make sure the route between the switch and Web cache server is reachable for the
Web cache redirection function to take effect.
A switch can have only one Web cache server configured. That is, a newly configured
Web cache server replaces the existing one.
Make sure both the interface of the VLAN that the Web cache server belongs to and
that of the VLAN whose HTTP traffic is to be redirected are up for the Web cache
redirection to take effect.
A switch does not support to redirect the HTTP traffic of the VLAN where the Web
cache server resides to the Web cache server.

Displaying Web Cache Redirection Configuration

Display Web cache redirection
configuration and the status of
the Web cache

Web Cache Redirection Configuration Example

Configuration Example
Networking requirements
The network of a company is organized as follows.
system-view
interface interface-type
interface-number
webcache address
ip-address mac
mac-address vlan vlan-id
[ tcpport tcpport-number ]
quit
webcache redirect-vlan
vlan-id
To do...
Use the command...
Use the command...
display webcache
1-3
Remarks
—
—
Required
Not configured by default.
—
Required
By default, no HTTP packet
is redirected to the Web
cache server.
Remarks
Available in any view.