3Com 5500-EI PWR Install Manual page 9

Table 1-1 lists the CLI views provided by the 3com switch 5500-EI, operations that can be performed in
different CLI views and the commands used to enter specific CLI views.
Table 1-1 CLI views
Available
View
operation
Display operation
status and
User view statistical
information of the
switch
Configure system
System view
parameters
Ethernet port Configure Ethernet
view port parameters
The 3com switch
Aux1/0/0 port 5500-EI does not
(the console support
port) view configuration on
port Aux1/0/0
Configure VLAN
VLAN view
parameters
Configure VLAN
interface
VLAN parameters,
interface view including the
management
VLAN parameters
Configure loopback
Loopback
interface
interface view
parameters
Configure NULL
NULL
interface
interface view
parameters
Local user Configure local
view user parameters
Prompt example
Enter user view
<Sysname> once logging into
the switch.
Execute the
system-view
[Sysname]
command in user
view.
100 Mbps Ethernet
Execute the
port view:
interface ethernet
command in
[Sysname-Etherne
system view.
t1/0/1]
Execute the
1000 Mbps
interface
Ethernet port view:
gigabitethernet
[Sysname-Gigabit
command in
Ethernet1/0/25]
system view.
Execute the
[Sysname-Aux1/0/ interface aux 1/0/0
0] command in
system view
Execute the vlan
[Sysname-vlan1] command in
system view.
Execute the
interface
[Sysname-Vlan-int
Vlan-interface
erface1]
command in
system view.
Execute the
interface
[Sysname-LoopBa
loopback
ck0]
command in
system view.
Execute the
interface null
[Sysname-NULL0]
command in
system view.
Execute the
[Sysname-luser-us local-user
er1] command in
system view.
1-8
Enter method Quit method
Execute the
quit command
to log out of the
switch.
Execute the
quit or return
command to
return to user
view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.