Ethernet Link Aggregation Configuration Task List; Configuring An Aggregation Group; Configuration Guidelines - 3Com 4500G Family Configuration Manual

MAC addresses carried in packets
IP addresses carried in packets
Port numbers carried in packets

Ethernet Link Aggregation Configuration Task List

Complete the following tasks to configure Ethernet link aggregation:
Configuring an
Aggregation
Group
Configuring an
Aggregate
Interface
Configuring
Load Sharing for
Link Aggregation
Groups

Configuring an Aggregation Group

Configuration Guidelines

Link aggregation cannot be used along with some features.
assigned to a Layer 2 aggregation group.
Table 1-5 Ports that cannot be assigned to a Layer 2 aggregation group
Port type
RRPP-enabled ports
MAC address
authentication-enabled ports
port security-enabled ports
IP source guard-enabled ports
802.1X-enabled ports
Removing an aggregate interface also removes the corresponding aggregation group. At the same time,
all the member ports of the aggregation group, if any, leave the aggregation group.
Task
Configuring a Static Aggregation Group
Configuring a Dynamic Aggregation Group
Configuring the Description of an Aggregate Interface
Enabling Link State Trapping for an Aggregate
Interface
Shutting Down an Aggregate Interface
Configuring Load Sharing Criteria for Link
Aggregation Groups
RRPP Configuration in the High Availability Volume
MAC Authentication Configuration in the Security Volume
Port Security Configuration in the Security Volume
IP Source Guard Configuration in the Security Volume
802.1X Configuration in the Security Volume
Table 1-5
Reference
1-9
Remarks
Select either task
Optional
Optional
Optional
Optional
lists the ports that cannot be