Show Config Port - HP StorageWorks 8/20q Command Line Interface Manual

show config port

Description Displays configuration parameters for one or more ports.
Authority None
Syntax
show config port [port_number]
Operands
[port_number]
The number of the port. Ports are numbered beginning with 0. If you omit [port_number], all ports
are specified.
Examples The following is an example of the show config port command for port 3:
8/20q FC Switch #> show config port 3
Configuration Name: default
-----------------------------
Port Number: 3
------------
AdminState
LinkSpeed
PortType
SymbolicName
ALFairness
DeviceScanEnabled
ForceOfflineRSCN
ARB_FF
InteropCredit
ExtCredit
FANEnabled
AutoPerfTuning
MSEnabled
NoClose
IOStreamGuard
PDISCPingEnable
See also set config
Offline
Auto
GL
Port3
False
True
False
False
0
0
True
True
True
False
Auto
True
port, page 195
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 235