Installing And Removing The Intel® Remote Management Module 4 Lite (Rmm4 Lite); Installing The Intel® Rmm4 Lite; Figure 54. Installing The M.2 Device; Figure 55. Connecting The M.2 Sata Cable - Intel S2600TP series Service Manual

Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
4. Install the IOM riser and carrier assembly to the server board. For instructions, see
Module.
5. Remove the M.2 SATA cable from its package.
6. Insert one end of the cable into the connector on the IOM riser and carrier assembly (see letter C) and
the other end into the connector on the server board (see letter D).
7. Push down the cable as required (see letter E) and make sure that the connectors are not stressed.
2.10 Installing and Removing the Intel® Remote Management
Module 4 Lite (RMM4 Lite)
2.10.1 Installing the Intel® RMM4 Lite
1. Remove the Intel® RMM4 Lite from its package.
2. Locate the RMM4 Lite connector on the server board next to the riser slot 2.
3. Place the Intel® RMM4 Lite over the connector and match the orientation of the Intel® RMM4 Lite to that
of the connector.
4. Press the Intel® RMM4 Lite down onto the connector.
26
Figure 54. Installing the M.2 Device
Figure 55. Connecting the M.2 SATA Cable
Installing an IO