Launching Movi Calls From Other Applications; Testing The Protocol Handler; Use Cases - Cisco TELEPRESENCE MOVI 4.1 - ADMINISTRATOR GUIDE V4.1.1.9724 Administrator's Manual

Table of Contents

Advertisement

Launching Movi calls from other applications

Movi will install itself as the default SIP protocol handler on the operating system. As long as Movi
remains the default SIP client, activating any SIP URI link will launch a call from Movi.
It is also possible to use "movi:" as the protocol rather than "sip:". This will ensure that Movi is always
used even if another SIP client is the system default.

Testing the protocol handler

1. Have the latest version of Cisco TelePresence Movi installed
2. Open a web browser (or a keyboard launch application such as Quicksilver or Launchy).
3. In the input (URL) field, type a SIP URI, then hit Enter.
Movi will now open and launch a call to the URI provided.
Note: Adding "//" after the "movi:" and "sip:" protocols is not supported by the Movi protocol handler.

Use cases

Add SIP URIs to default employee email signatures and vcards.
n
Embed SIP URI links in intranet employee profiles, helpdesk contact pages, and similar.
n
Integrate with any application that can send a protocol request to the operating system.
n
Cisco TelePresence Movi Administrator Guide (4.1)
Launching Movi calls from other applications
Page 17 of 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence movi 4.1

Table of Contents