Protocol Specific Information - Cisco CTS-500 Configuration Manual

Configuring a Cisco TelePresence Device
Table 1-1 Device Information Window (continued)
Field
Check-Boxes
Use Device Pool Calling
Party Transformation CSS
Retry Video Call as Audio
Ignore Presentation
Indicators
Allow Control of Device
from CTI
Logged Into Hunt Group
Remote Device
Note When you are finished making changes, click Save to save your settings.

Protocol Specific Information

To configure protocol-specific information, enter information into the fields using the information in
Table 1-2
Table 1-2 Cisco TelePresence Protocol-Specific Information
Field
Packet Capture Mode
Packet Capture Duration
Presence Group
SIP Dial Rules
MTP Preferred Originating
Codec
Device Security Profile
Rerouting Calling Search Space —
SUBSCRIBE Calling Search
Space
SIP Profile
Digest User
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-8
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Required? Setting
— Box is checked.
— Box is checked.
— Box is un-checked.
— Box is checked.
— Box is checked.
— Box is un-checked.
as a guide. Click Save to save your settings.
Required? Setting
Yes <None>
— 0
Yes Standard Presence Group
— <None>
Yes 711ulaw
Yes Cisco TelePresence - Standard SIP Non-Secure Profile (default)
For more information about configuring Cisco Unified CM security
Note
features, refer to the
Security Guide, Release
<None>
Note Information in this field reflects Calling Search Spaces that have been
created on this Cisco Unified CM.
— <None>
Note Information in this field reflects Calling Search Spaces that have been
created on this Cisco Unified CM.
Yes Standard SIP Profile.
Note Information in this field reflects SIP profiles that have been created
on this Cisco Unified CM.
— <None>
Cisco Unified Communications Manager
7.1(2).
OL-21851-01