Configuring A Service Set (Nsm Procedure); Table 266: Service Interface Pools Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and MX-series Devices
Related Topics

Configuring a Service Set (NSM Procedure)

456

Table 266: Service Interface Pools Configuration Details

Task
Configure a service interface
pool for VPN aggregation for
the BGF feature.
Configuring a Service Set (NSM Procedure) on page 456
Configuring Stateful Firewall (NSM Procedure) on page 460
A service set is a collection of services to be performed by an Adaptive Services (AS) or
Multiservices PIC.
To configure a service set in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services.
3.
Select Service Set.
4.
Add or modify the settings as specified in Table 267 on page 457.
5.
Click one:
6.
OK—Save the changes.
Cancel—Cancel the modifications.
Your Action
1. In the Comment box, enter the comment.
2. Expand Service Interface Pools.
3. Click Pool next to Service Interface Pools.
4. Click Add new entry next to Pool.
5. In the Name box, enter the name of the service interface
pool.
6. In the Comment box, enter the comment.
7. Click Interface next to pool.
8. Click Add new entry next to interface.
9. In the Name box, enter the name and logical unit number of
the service interface.
10. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.