Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual page 169

Related Topics
Copyright © 2010, Juniper Networks, Inc.
Table 65: Interfaces Configuration Fields (continued)
Option
Input Traffic Control Profile
Remaining
Output Traffic Control Profile
Output Traffic Control Profile
Remaining
Configuring CoS Classifiers (NSM Procedure) on page 122
Configuring CoS Code Point Aliases (NSM Procedure) on page 124
Configuring CoS Drop Profile (NSM Procedure) on page 125
Chapter 13: Configuring Class of Service Features
Function
Applies an input traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Applies an output traffic
scheduling and shaping profile
to the logical interface.
Applies an output traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Your Action
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select
Input
Traffic Control Profile
Remaining .
4. Specify the comment
and profile name.
5. Click Ok.
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select Output
Traffic Control Profile .
4. Specify the comment
and profile name.
5. Click Ok.
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select Output
Traffic Control Profile
Remaining .
4. Specify the comment
and profile name.
5. Click Ok.
137