Table of Contents
Advertisement
M-series and MX-series Devices
Related Topics
Configuring the Access Profile (NSM Procedure)
Related Topics
70
Table 28: SecurID Server Configuration Details
Task
Configure the SecurID
server.
Configuring the RADIUS for Subscriber Access Management, L2TP, or PPP (NSM
Procedure) on page 68
To configure the access profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, select Access Profile.
3.
Add or modify settings as specified in Table 29 on page 70.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 29: Access Profile Configuration Details
Task
Configuring the access profile.
Configuring Access Profiles for L2TP or PPP Parameters (NSM Procedure) on page 54
Configuring the RADIUS Parameters (NSM Procedure) on page 66
Your Action
1.
Click Add new entry next to Securid Server
2.
In the Name box, enter the name of the SecurID server.
3.
In the Comment box, enter the comment.
4.
In the Configuration File box, enter the path to the SecurID
server configuration (sdconf.rec) file.
Your Action
1.
In the Comment box, enter the comment.
2.
In the Name box, enter the name of the access profile.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 and is the answer not in the manual?