Configuring Segmentation (Nsm Procedure); Table 253: Notification Behavior Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and MX-series Devices
444

Table 253: Notification Behavior Configuration Details

Task
Configure the default
frequency for sending media
inactivity notifications for
regulated events.

Configuring Segmentation (NSM Procedure)

You can configure default values for properties in the segmentation package using this
option.
To configure segmentation in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Gateway.
4.
Add or modify the settings as specified in Table 254 on page 445.
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Your Action
1. Click Add new entry next to Gateway.
2. Click H248 Properties next to gateway.
3. Expand H248 Properties.
4. Click Notification Behavior next to H248 properties.
5. In the Comment box, enter the comment.
6. Expand Notification Behavior.
7. Click Notification Regulation next to Notification Behavior.
8. In the Comment box, enter the comment.
9. In the Default box, enter the default frequency for sending
media inactivity notifications for regulated events.
Copyright © 2010, Juniper Networks, Inc.