Table of Contents
Advertisement
Related Topics
Configuring Event Policy Tracing Operations (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Table 76: Configure Event Policy Details (continued)
Task
Create a list of events that
must (or must not) occur
within a specified time
interval for the policy to be
triggered.
Configuring Destinations for File Archiving (NSM Procedure) on page 151
Configuring Event Script (NSM Procedure) on page 152
Generating Internal Events (NSM Procedure) on page 154
Configuring Event Policy Tracing Operations (NSM Procedure) on page 157
Event policy tracing operations track all event policy operations and record them in a log
file. The logged error descriptions provide detailed information to help you solve problems
faster.
To configure event policy tracing operations in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Event Options.
3.
Select Traceoptions.
4.
Your Action
1.
Click Add new entry next to Within.
2.
Expand Within.
3.
From the Name list, select the interval between events.
4.
Click Events next to within.
5.
Click Add new entry next to Events.
6.
In the New events dialog box, enter the events that trigger
this policy.
7.
Expand Not.
8.
Click Events next to Not.
9.
In the New events dialog box, enter the events that trigger
this policy.
10.
Click Trigger next to Not.
11.
In the Comment box, enter the comment.
12.
Select one of the following:
a.
until—if the policy is to be executed each time a
matching event is received and stops being executed
when the number of matching events received equals
number.
b.
on—if the policy is executed when the number of
matching events received equals number.
c.
after—if the policy is executed when the number of
matching events received equals number + 1.
13.
From the Count list, select the number of times an event or
set of events should occur within a specified time period.
Chapter 14: Configuring Event Options
157
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 and is the answer not in the manual?