Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual page 168

M-series and MX-series Devices
136
Table 65: Interfaces Configuration Fields (continued)
Option
Internal Node
Excess Bandwidth Share
Input Excess Bandwidth Share
Input Traffic Control Profile
Function
Sets the scheduler node as
internal, allowing resource
scheduling to be applied
equally to interface sets that
include child nodes and those
that do not include child
nodes.
Sets the excess bandwidth
sharing value.
Sets the excess input
bandwidth sharing value.
Applies an input traffic
scheduling and shaping profile
to the logical interface.
Copyright © 2010, Juniper Networks, Inc.
Your Action
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Set the internal node.
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select
Excess
.
Bandwidth Share
4. Specify the comment
and proportion.
5. Click Ok.
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select
Input
.
Excess Bandwidth Share
4. Specify the comment
and proportion.
5. Click Ok.
1. Expand the Interfaces
tree and select Interface
Set.
2. Click the New button or
select an interface set
and click the Edit button.
3. Expand interface—set
tree and select
Input
.
Traffic Control Profile
4. Specify the comment
and profile name.
5. Click Ok.