Configuring Tacacs+ Authentication (Nsm Procedure); Table 53: Tacacs+ Authentication Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and MX-series Devices
Related Topics

Configuring TACACS+ Authentication (NSM Procedure)

114
Table 52: RADIUS Authentication Configuration Details (continued)
Option Function
Secret Specifies the shared secret (password) of the
RADIUS server. The secret is stored as an
encrypted value in the configuration database.
Source Specifies the source address to be included in
Address the RADIUS server requests by the device. In
most cases, you can use the loopback address
of the device.
Configuring TACACS+ Authentication (NSM Procedure) on page 114
Configuring Authentication Order (NSM Procedure) on page 115
Configuring User Access (NSM Procedure) on page 116
To use TACACS+ authentication, you must configure at least one TACACS+ server.
Configuring TACACS+ authentication involves identifying the TACACS+ server, specifying
the secret (password) of the TACACS+ server, and setting the source address of the
device's TACACS+ requests to the loopback address of the device.
To configure TACACS+ authentication:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab and then double-click the device for which you want to
2.
configure TACACS+ authentication.
Click the Configuration tab. In the configuration tree, select System > TACACS+
3.
Server.
Add or modify TACACS+ settings as specified in Table 53 on page 114.
4.
Click one:
5.
New—Adds a new TACACS+ server.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 53: TACACS+ Authentication Configuration Details

Option Function
Name Specifies the IP address of the TACACS+ server.
Your Action
Enter the shared secret of the
RADIUS server.
Enter the loopback address of
the device.
Your Action
Enter the IP address of the
TACACS+ server.
Copyright © 2010, Juniper Networks, Inc.