Procedure); Table 108: Receive Bucket Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and MX-series Devices
Configuring Tracing Operations of an Individual Router Interface (NSM Procedure)
210
Cancel—Cancels the modifications.

Table 108: Receive Bucket Configuration Details

Task
Configure receive bucket
properties.
You can define tracing operations for individual interfaces using this option. To specify
more than one tracing operation, include multiple flag statements.
To configure tracing operations of an router interface in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Interfaces.
3.
Select Interface.
4.
Add or modify settings as specified in Table 109 on page 211.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1. Click Add Interface next to Interface.
2. In the Add Interface Dialog box, enter the interface name.
3. Click Receive Bucket next to interface.
4. In the Comment box, enter the comment.
5. From the Overflow list, select how to handle packets that
exceed the threshold for the receive leaky bucket.
Select tag to tag, count, and process received packets that
exceed the threshold.
Select discard to discard received packets that exceed the
threshold.
6. From the Rate list, select the percentage of the interface line
rate that is available to receive or transmit packets.
Range: 0 through 100
7. From the Threshold list, select the maximum size, in bytes,
for traffic bursts.
Range: 0 through 65,535 bytes
Copyright © 2010, Juniper Networks, Inc.