Appletalk Protocol Information; Dlc/Llc Protocol Information - HP Jetdirect J7974E Administrator's Manual

Table 8-9 Novell NetWare Configuration Information (continued)
Message
ATTACHED SERVER:
QUEUE POLL INTERVAL
SAP INTERVAL:
SERVER x:

AppleTalk Protocol Information

Information in this section of the Jetdirect configuration page (Ethernet Only) is described in
8-10 AppleTalk Configuration
Table 8-10 AppleTalk Configuration Information
Message
STATUS:
NAME:
ZONE:
TYPE:
NETWORK NUMBER:
NODE NUMBER:

DLC/LLC Protocol Information

Information in this section of the Jetdirect configuration page is described in
Configuration
128 Chapter 8 HP Jetdirect Configuration Pages
Description
The Attached Server field identifies the Jetdirect discovery method [NSQ] (Nearest
Service Query) or [GSQ] (General Service Query) and the name of the proxy file server
used to locate the configured bindery servers.
Not Specified or blank: A NetWare server has not been configured.
(Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print server
waits to check for print jobs in a print queue. The default is 2 seconds.
Specifies the time interval (seconds) that the HP Jetdirect print server waits between
Service Advertising Protocol (SAP) broadcasts on the network. The default is 60
seconds.
Identifies a NetWare file server to which the HP Jetdirect print server is attached.
Information. For error messages, see
Description
Indicates the current AppleTalk configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that AppleTalk was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or name.
An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
The name of the printer on the AppleTalk network. A number after the name indicates
that there are multiple devices with this name, and this is the Nth instance of the name.
The name of the AppleTalk network zone on which the printer is located.
The type of the printer being advertised on the network. Two types can be displayed.
NETWORK NUMBER: Identifies the AppleTalk Network Number on which the HP
Jetdirect print server is currently operating.
NODE NUMBER: Identifies the AppleTalk Node Number that the print server chose for
itself as part of its initialization sequence.
Information.
Table 8-12 Error Messages.
NOTE The AppleTalk phase 2 (P2) parameter is preconfigured on the HP
Jetdirect print server.
Table 8-12 Error Messages.
Table 8-11 DLC/LLC
Table
ENWW