Novell NETWARE 6-DOCUMENTATION Manual page 52

52
NetWare 6 Readme
The default configuration utility can make a user Auditor for only one
partition.
To make the same user an Auditor for more than one partition, do the
following:
Manually configure NAAS.
Grant the auditor Read and Compare rights to the LDAP Server
attribute for the partition containing the User object.
Grant the auditor Read and Compare rights to the
LDAP:keyMaterialName attribute for the partition containing the
User object.
After generating a report for one naasAuditorQueryDomain, restart
ConsoleOne to generate a report for a second domain.
The NAAS schema for eDirectory does not get extended from the
NetWare 6 server if that server happens to be a nonreplica server.
Run the NAAS installation from a NetWare 6 server that is hosting a
Read/Write replica of Root.
Audit Data Commit
Automatic commit of audit cache on reaching the specified threshold is not
enabled. The size of the cache file will grow until the periodic commit is
scheduled.
NAAS Agent
Occasionally, the NAAS Agent might fail to commit data to the NAAS Server
due to communication failure. However, there is no loss of data and the data
is cached.
To resolve this, do the following:
1
Unload Java.
This unloads some of the NAAS Agent and NAAS server components.
2
Reload Java using the LOAD JAVA command at the system console.
3
Reload the unloaded NAAS components using the ST_AGENT and
ST_SRVR commands at the system console.