Modifying Action Set Options; Install Action Set Options; Section 3.19, "Modifying Action Set Options - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

Because you are removing the bundle from devices, the Add Assignments dialog box opens
with the
are displayed along with any custom folders that you have created in the
2 Browse for and select the devices, device groups, and device folders from which you want to
remove the bundle. To do so:
2a Click
navigate through the folders until you find the device, group, or folder you want to select.
If you are looking for a specific item, such as a Workstation or a Workstation Group, you
can use the Items of type list to limit the types of items that are displayed. Also, if you
know the name of the item you are looking for, you can also use the Item name box to
search for the item.
2b Click the underlined link in the Name column to select the device, group, or folder and
display its name in the Selected list box.
2c Click OK to add the selected devices, folders, and groups to the Devices list.

3.19 Modifying Action Set Options

When you create a bundle, all
action set, they run according to the action set's options. However, not all action sets are enabled by
default. The Install, Launch, and Terminate action sets are enabled, meaning that after you add an
action, it runs on assigned devices according to its action set's options. The Uninstall action set is
not enabled by default.
The following sections contain information about modifying action set options and enabling the
Uninstall action set:
Section 3.19.1, "Install Action Set Options," on page 70
Section 3.19.2, "Launch Action Set Options," on page 71
Section 3.19.3, "Uninstall Action Set Options," on page 72
Section 3.19.4, "Terminate Action Set Options," on page 74

3.19.1 Install Action Set Options

The Install Options dialog box lets you specify the how often the bundle's install actions are
performed on managed devices and to specify if users can postpone the bundle's installation.
1 In the ZENworks Control Center, click the Bundles tab.
2 In the Bundles list, click a bundle's underlined link in the Name column to display its Summary
page.
3 Click the Actions tab, then click the Install tab.
4 Click Options to display the Install Options dialog box.
70 ZENworks 10 Configuration Management Software Distribution Reference
folder as the root folder. By default, the
Devices
next to a folder (for example, the
actions are enabled by default, meaning that after you add them to a
and
Servers Workstations
folder or
Workstations
folders
folder.
Devices
folder) to
Servers