Complete Post-Upgrade Tasks; Specifying Disk Drivers Manually - Novell NETWARE 6-DOCUMENTATION Manual

Complete Post-Upgrade Tasks

Installing Licensing Certificates
Installing Additional Networking Products

Specifying Disk Drivers Manually

20
Other Installation Options
Because the NetWare Accelerated Upgrade utility does not install licenses,
use iManage via NetWare Web Manager to install license certificates on the
new NetWare 6 server.
NOTE:
If licenses are installed at the [Root] of the NDS tree or you are on an MLA
account, you might not need to install additional licenses.
1
Go to NetWare Web Manager by entering the following into a Web
browser:
https://nw6serveripaddress:portnumber
2
Click the iManage icon.
3
Click License Management > Install Licenses.
4
Follow the on-screen instructions.
NetWare Accelerated Upgrade does not install additional products. If you
want to add network products, you can do so in one of two ways:
Through the server console by clicking the Novell icon on the servertop
and then Install.
Through Deployment Manager (located at the root of the NetWare 6
Operating System CD).
You might want to change the behavior of hardware detection and the NDS
database upgrade. By replacing the -U option with the -MU option from the
lines that load HDETECT.NLM in the HWDETECT.ICS script file, you can
confirm or add new hardware devices during the upgrade.
To confirm or add new hardware devices during the upgrade, you must
physically be at the server console of the target server.
This procedure can also be used to load disk drivers that are not provided on
the NetWare 6 Operating System CD. This action might be beneficial when
upgrading multiple servers with identical hardware components. If you select