Novell NETWARE 6-DOCUMENTATION Manual page 319

CopyToStartup
122 Other Installation Options
<target_directory_path> is a directory path relative to SYS: where the files
will be copied. <file_spec> names the files to be copied; it might be in the
"directory/file" form to copy files from a subdirectory. <source_volume>
specifies the name of a diskette volume label and <source_description>
specifies the string used to prompt for the diskettes. If the installation source
is a CD-ROM or network drive, the <source_volume> and
<source_description> fields are ignored (although these fields must be
present in the command).
Example
CopyToServer 'SYSTEM', '*.*', 'SYSTEM-2', "NetWare
diskette [4]"
Files matching the DOS file specification (including DOS wildcard names)
are copied from the volume SYSTEM-2 (or from a user-specified hard disk or
network directory) to directory SYS:SYSTEM. If the volume SYSTEM-2 is
not present, the user will be prompted to insert the NetWare CD.
Syntax
CopyToStartup <file_spec>, <source_volume>,
<source_description>
Description
CopyToStartup copies files to the startup or boot directory (where
STARTUP.NCF is). The source files are assumed to be those on the
distribution diskettes (which might have been copied to a user-specified
directory).
<file_spec> names the files to be copied. To copy files from a subdirectory,
<file_spec> can be of the form "directory/file". <source_volume> specifies
the name of a diskette volume label and <source_description> specifies the
string used to prompt for the diskettes. If the installation source is a CD or
network drive, <source_volume> and <source_description> are ignored
(although these fields must be present in the command).
Example
CopyToStartup 'SERVER.EXE', 'SYSTEM-3', "NetWare diskette
[3]"
SERVER.EXE is copied to the user-designated DOS startup directory where
the server boot files will reside.