Printing; Windows Nt/2000/Xp Issues; Installation - Novell NETWARE 6-DOCUMENTATION Manual

Printing

Do Not Configure a Local NPRINTER with Interupts

Windows NT/2000/XP Issues

Installation

IPX Compatibility Mode and the IPX Internal Network Number
(Windows NT-Only) Errors Resulting from a Custom Installation of Novell Client for
Windows NT
Using Remote Management with ZENworks for Desktops
NDPS Required on NetWare 5.1
102 Novell Client for Windows
Do not configure a local NPRINTER with interrupts. Use the default Polled
Mode instead.
The following issues will help you troubleshoot Novell Client for Windows
NT/2000 and Novell Client for Windows XP. For additional issues, check the
Novell Client Readme.
Workstations using IPX Compatibility Mode cannot have an IPX internal
network number configured. If you have configured an IPX internal network
number on your workstation and you plan to install the Novell IP Client with
IPX Compatibility Mode, then remove the IPX internal network number
before installing the client.
We recommend that you use the Typical Installation option for most
installations of Novell Client software. If you are installing Novell Client and
you select Custom Installation, note that the Novell IP gateway is not
compatible with NetWare IP or CMD (IPX Compatibility Mode Driver).
If you plan to use Remote Management, make sure that Workstation Manager
is installed on all workstations that will be managed remotely.
An update to NDPS is required to solve a client hang. Install the
DPRPCNLM.NLM file, dated 22Nov2000 or later. This update is included in
NetWare 5.1 Support Pack 3. Refer to TID 10062546.