Command Format; Examples; Attach - Novell NETWARE 6-DOCUMENTATION Manual

Command Format

Examples

ATTACH

The executable file cannot be found
Insufficient workstation memory is available to load the file
@ [path] filename [parameter]
Replace path with a drive letter.
Replace filename with an executable file (files that end in .EXE, .COM, or
.BAT, for example). Do not include the extension.
Replace parameter with any parameters that must accompany the executable
file.
If you want to start the GroupWise
must have a search drive mapped to where the GroupWise application is
stored. Enter the following command in the login script:
@GRPWISE5
You do not need to enter a path in this case, because the executable program
file for GroupWise 5 (GRPWISE5.EXE) is located in a search drive.
If you do not have a search drive mapped to the directory where the program
is located, include the path to that directory in the command. For example, if
the program to run GroupWise 5 is located in the APPS directory on drive G,
use the following command:
@SYS:\APPS\GRPWISE5
Establishes a connection between a workstation and a NetWare server. If the
server is not in the current tree, a bindery connection is made.
In networks running NetWare 3 or earlier versions, use the ATTACH
command to connect to multiple file servers. In NetWare 4 and later, users no
longer need to attach separately to multiple servers and do not need to use the
ATTACH command. If users want to connect to multiple trees, use the TREE
command (see "TREE" on page
HINT:
To create persistent drive mappings, use the MAP command (see
page 80).
®
program from within the login script, you
89).
Login Script Commands and Variables
"MAP" on
69