Novell NETWARE 6-DOCUMENTATION Manual page 246

Frame Type n = <frame type>
Logical Name n = <string>
Octet Bit Order = <string>
Default
Values
Key Required
Example
Purpose
Default
Values
Key Required
Example
Purpose
Default
Values
Key Required
Example
Purpose
Automating the NetWare Installation with a Response File
(none)
(frame types supported by the driver are found in the
driver's LDI file)
No
Frame Type 1 = Ethernet_802.2
Identifies the network frame type to be used when loading
the driver. There can be as many descriptions as there
are frame types supported by the driver—n uniquely
identifies the frame type (for example, 1, 2, etc.).
(none)
(text combining the Frame Type with the Adapter Name)
No
Logical Name 1 = 3C59X_1_E82
Identifies the name to be used when binding a protocol to
a frame type on this adapter. There must be a logical
name for each frame type loaded with the driver—n
uniquely identifies the frame type (for example, 1, 2,
etc.).
LSB
LSB or MSB
No
Octet Bit Order = LSB
Specifies the bit order (Least Significant Bit or Most
Significant Bit) that this network adapter uses for
deciphering the node address.
49