[Nwi:volume N] Section - Novell NETWARE 6-DOCUMENTATION Manual

[NWI:Volume n] Section

Volume Name = <string>
Volume Type = <string>
56
Other Installation Options
Example
Description
Default
Values
Key Required
Example
Purpose
Default
Values
Key Required
Example
Purpose
[NWI:Volume 0]
This section can be included for each volume defined on the
server. Note that SYS must be Volume 0. This section allows
volumes to be created on specific partitions in the system
during installation. The partitions are specified by the key
entries in the section. The zero-based sequence number (n
= 0, 1, 2, 3, ...) in the section heading specifies the order in
which the volumes are created. Volume SYS must be
defined in [NWI:Volume 0].
(none)
(valid volume name)
Yes
Volume Name = DATA
Identifies the name of the volume; follows naming
convention found in the NetWare user documentation.
NSS
NetWare or NSS or Free
No
Volume Type = NSS
Specifies the type of the volume to be created. Note that
volume types must be created on like partition types (e.g.,
NSS volume on NSS partition).