Novell NETWARE 6-DOCUMENTATION Manual page 589

36
Novell iFolder Administration Guide
Locate the ServerName parameter. By default, this parameter
displays the IP address of the server. Replace this IP address with the
IP address or DNS name of the cluster-enabled volume.
Locate the SecureListen ipaddress "SSL CertificateIP" parameter.
Change the IP address that is listed to the IP address or DNS name of
the cluster-enabled volume.
8
Save your changes to the HTTPD.CONF file and then copy it to every
iFolder server in the cluster.
9
Next, edit the AUTOEXEC.NCF file on every iFolder server in the
cluster and comment out the line that reads startifolder.
The startifolder command allows iFolder to start by default when you
reboot your server. However, when you use iFolder in a clustered
environment, iFolder is started by NetWare Cluster Services.
10
From the workstation, Launch ConsoleOne
11
Browse to your cluster container object.
12
Right-click the cluster volume resource and then click Properties > IP
Address.
13
Verify that the IP address that appears is the one that you have assigned
to the cluster-enabled volume.
14
In the Properties dialog box, click Scripts > Cluster Resource Load Script.
15
Add the following commands to the end of the existing load script:
startifolder
16
Apply.
17
Click Scripts > Cluster Resource Unload Script
18
Add the following commands to the beginning of the existing unload
script:
stopifolder
delay 2
19
Click Apply > Close.
Novell iFolder is now installed. For more information on using Novell iFolder,
see Chapter 6, "Using Novell iFolder," on page
.
TM
37.