Novell NETWARE 6-DOCUMENTATION Manual page 34

34
NetWare 6 Readme
Running iPrint Map Designer
To have full functionality of the iPrint Map Designer, IPPSRVR.NLM must be
loaded before starting iPrint Map Designer.
Changing Printer Security Levels
If you change the printer agent security level to high and do not check the
Requires Security check box on the IPP Support page of the printer's Client
Support Page in iManage, you will receive the following error:
Error message: iPrint Client - "The request requires user
authentication."
IMPORTANT:
When you check the Requires Security check box, the URL for the
associated printer will change. Users who have already installed this printer will
have to delete and reinstall the printer in order to use the updated URL.
Invalid IP Address When Loading the NDPS Manager
When you load the NDPS Manager, you can specify an IP address or DNS
name. If you do not specify one, the NDPS Manager uses the address stored
in SYS:\ETC\HOSTNAME. If either the IP address or DNS name specified
on the command line or in the HOSTNAME file is invalid, you will receive
the following error:
IP Address xxx.xxx.xx.xxx, specified at load time, is not
bound. Program execution cannot continue normally. Press
Escape to continue.
To resolve the error, use a valid DNS Name or IP Address on the command
line, or edit the SYS:\ETC\HOSTNAME file to contain a valid address.
Using TTS on NSS Volumes
By default the Transaction Tracking System
volumes for NetWare 6 servers. To protect database integrity, NDPS requires
that TTS be enabled on the NDPS Manager's host volume before
NDPSM.NLM is loaded. If the NDPS Manager's host volume is an NSS
volume, you should enable TTS by completing the following:
1
Enter
NSS /transaction=NDPS_Manager_host_volume_name
If you want to list the NSS volumes on a server, enter NSS volumes.
2
Dismount the NSS volume by entering
NSS /Deactivate=NDPS_Manager_host_volume_name
(TTS ) is not enabled on NSS
TM TM