Run Novell Netware Migration Wizard - Novell NETWARE 6-DOCUMENTATION Manual

Run Novell NetWare Migration Wizard

12
NetWare Migration Wizard 6 Aministration Guide
If there is a conflict between the properties of a Template object and properties
of a NetWare 3 user, the properties of the Template object will, in most cases,
take priority. For example, if a minimum password length of seven characters
is specified for the NetWare 3 user, Jeff, and a minimum password length of
nine characters is specified in the Template object, then when Jeff's object is
migrated, the object will be created in NDS with a password length of nine
characters.
If you want to know what additional NDS attributes can be defined in a
Template object, run ConsoleOne and double-click a Template object to view
all of the existing properties.
The last name, full name, and description of every NetWare 3 object is always
migrated and these corresponding properties from the Template object are
overwritten.
If you decide to use a Template object, you can create one in ConsoleOne by
clicking File > New > Object > Template.
Continue with the next section,
1
Download and install NetWare Migration Wizard 6 from the NetWare
section of the Novell Software Downloads Web site (http://
www.novell.com/download/).
2
Run Migration Wizard from the location where you installed it.
The installation program, by default, installs Migration Wizard at this
location: Start Menu > Programs > Novell > Netware Migration Wizard
> NetWare Migration Wizard.
3
Read the Welcome screen and click OK.
4
Click Create a New Project > OK.
5
Click NetWare 3 > OK.
6
Click the View Setup Tasks button.
This launches your default Web browser and takes you to the NetWare
Migration Wizard 6 online documentation.
7
Browse to Chapter 1, "Migrating Data from NetWare 3," on page 9
make sure you have completed the system and software requirements in
"Meet System and Software
"Run Novell NetWare Migration
Requirements." Then close your browser.
Wizard."
and