Novell NETWARE 6-DOCUMENTATION Manual page 17

Installing a NetWare 5.1 Server into a Tree with a NetWare 6 SDI
Server
When installing a NetWare 5.1 server into a tree with a NetWare 6 Security
Domain Infrastructure (SDI) server, the installation fails with a "125" error
due to a security upgrade.
The following error message is displayed:
Error while Contacting Security Domain Infrastructure Key
Server: NW6_1.Servers.RCH.TX.HCSC
Error #125
If the Security Domain Infrastructure server in the NDSPKI:SD Key Server
DN attribute in the Security.KAP.WO container is a NetWare 6 server, then a
NetWare 5.1 server installation into the tree will fail with this error.
This error happens during the final file copy and shows up as part of the Novell
Certificate Server
TM
5.1 server, complete the following steps:
1
Install the NetWare 5.1 server standalone (into its own tree).
2
Delete the file SYS:SYSTEM\NICI\NICISDI.KEY.
3
Update the NetWare 5.1 server to NICI 2.0.1 or later.
You can download this version of NICI from the Novell download site.
4
Using NWCONFIG, uninstall eDirectory on the NetWare 5.1 server.
5
Using NWCONFIG, install eDirectory onto this server and specify to
install the server into the existing NetWare 6 tree.
6
Run the Novell Certificate Server installation either from the server
console or through the NetWare Deployment Manager.
The Certificate Server installation automatically creates the necessary
security objects.
7
Configure products that use SSL certificates, such as LDAP, Web Server,
etc., to use the new certificates.
Accelerated Upgrade: Installing Apache Web Server
Because NetWare Accelerated Upgrade does not install or update any
software applications outside of the core NetWare operating system, the
Apache Web server is not upgraded/installed during the upgrade. The
following products are dependent on Apache: Novell iFolder, NetWare Web
installation. To complete the installation of the NetWare
Installation and Upgrade
17