Installing Nls; Verifying That Nls Is Installed - Novell NETWARE 6-DOCUMENTATION Manual

Installing NLS

Verifying That NLS Is Installed

22
Novell Licensing Services Administration Guide
NOTE:
If you are running NetWare for Small Business or NetWare for Growing
Business, you should install the corresponding Support Pack before upgrading to
NetWare 6.
Know where to install NLS.
For more information, see
in the User Access Licensing for NetWare Guide.
When you install or upgrade to NetWare 6, NLS is automatically installed. For
a NetWare 6 server in a new eDirectory tree, no other action concerning the
licensing service is required.
For fault tolerance, you should have NetWare 6 (or NLS) running on a second
server in same partition as the other server.
NLS-enabled applications can use the licensing service. See the product-
specific documentation for information about implementing the licensing
services for that product.
1
At the server console GUI, click Novell > Install, and then look for an
NLS entry.
2
Do one of the following:
If NLSLSP.NLM is running on the server, enter the following at the
server console:
modules nls*
If NLS_LSP_servername is a leaf object in eDirectory, vew this
object in iManage.
Guidelines for Installing License Certificates