Setting Up Consoleone On A Workstation; Configuring Disk Space - Novell NETWARE 6-DOCUMENTATION Manual

Setting Up ConsoleOne on a Workstation

Configuring Disk Space

26
Novell Storage Services Administration Guide
This opens the ConsoleOne interface where you can access the snap-ins
for managing NSS. The NSS configuration features are in the Media
snap-in.
To use ConsoleOne on a client workstation, you need to load ConsoleOne 1.3
or later. Then you must copy the NSS JAR files from your server to your client
machine.
1
Copy these three NSS JAR files to your local LIB directory:
public\mgmt\consoleone\1.3\lib\nssadmin.jar
public\mgmt\consoleone\1.3\lib\nssc1lib.jar
public\mgmt\consoleone\1.3\lib\nssjavalib.jar
2
Copy these two JAR files to your local RESOURCES directory:
public\mgmt\consoleone\1.3\resources\nssadminres.jar
public\mgmt\consoleone\1.3\resources\nssc1libres.jar
3
Copy the following JAR file to your local SNAPINS directory:
public\mgmt\consoleone\1.3\snapins\nssadminreg.jar
To set up the NSS storage and file system, complete the following tasks in the
given order:
1. Create a RAID device (optional).
See "Creating a RAID Device" on page
2. Create partitions.
See "Creating a Partition" on page
3. Mirror partitions.
See "Creating a Partition" on page
4. Create storage pools.
See "Creating a Storage Pool" on page
5. Create logical and traditional volumes.
See "Creating a Logical Volume" on page 32
Volume" on page
29.
29.
37.
27.
31.
and "Creating a Traditional