Summary; Naming The Server - Novell NETWARE 6-DOCUMENTATION Manual

Summary

Naming the Server

46
NetWare 6 Overview and Installation Guide
Volume SYS: Size—The size that you specify for the NetWare partition will
be used for the size of volume SYS:.
To modify the volume SYS: size, in the Options box select Modify. Select the
appropriate storage device. Select the NetWare Partition Size field and press
Enter. Backspace over the current size. Type the new size and press Enter. The
size of volume SYS: will change accordingly. Press F10 to save the settings
and continue.
If you plan to have additional volumes on the server, remember to reduce the
size of the NetWare partition and volume SYS: so that the appropriate amount
of disk space is available for other volumes.
Additional volumes can be created later during the installation program or
after completing the installation using ConsoleOne
HINT:
Although an NSS volume SYS: is recommended for most server
installations, you can create a traditional volume SYS: by pressing F5.
NetWare system files will now be copied to volume SYS:.
If you are installing from the network, you will be prompted to reconnect to
the network. To continue the installation, enter the password for the user that
originally logged in.
The NetWare installation program will continue in graphical display mode.
The NetWare server name must be unique from all other servers on the
eDirectory tree. The name can be between 2 and 47 alphanumeric characters
and can contain underscores (_) and hyphens (-), but no spaces. The first
character cannot be a period (.).
IMPORTANT:
The server name must be different from the name that you plan to
use for the eDirectory tree.
.
TM