What's Next; Updating Nss Volumes; Installing Additional Products - Novell NETWARE 6-DOCUMENTATION Manual

What's Next?

Updating NSS Volumes

Installing Additional Products

84
NetWare 6 Overview and Installation Guide
After the files are copied, click Yes to reboot the server. If you chose to load
server on reboot, the NetWare 6 server software will automatically load when
the computer reboots.
If you chose not to load the server on reboot, you can load it manually. To load
the server manually, reboot the computer by clicking Yes. When the computer
reboots, change to the startup directory containing the NetWare server files
(C:\NWSERVER) and enter SERVER.
Although you have installed or upgraded to NetWare 6, you may need to
configure products to work in the new environment. If you chose not to install
a product during the server installation, you can follow the instructions in
"Installing Additional Products" on page 84
If you upgraded from a NetWare 5.1 server with NSS volumes, you must
complete the following procedure to update NSS volumes.
NOTE:
For more detailed information, see
Storage Services Administration Guide.
1
When prompted at the end of the upgrade, reboot the computer.
2
Make sure that all processes relating to the NetWare 6 upgrade have
completed.
3
At the server console, enter the following command
NSS /ZLSSVOLUMEUPGRADE=ALL
The NSS volumes can now be mounted on the NetWare 6 server.
You should now install and set up other networking products. For specific
product information, see the product documentation in the
Documentation (http://www.novell.com/documentation/lg/nw6p). For brief
product descriptions, see
Although many products can be installed during the basic server installation,
some additional products such as Novell Cluster Services
only after completing the server installation. You can install additional
to do it afterwards.
"Updating NSS
Chapter 1, "Welcome to NetWare 6," on page
Volumes" in the Novell
NetWare 6 Online
11.
can be installed
TM