[Nwi:protocols] Section - Novell NETWARE 6-DOCUMENTATION Manual

[NWI:Protocols] Section

Prompt = <string>
Single Network Adapter=<string>
Default IP Frame Typer=<string>
Default
Values
Key Required
Example
Purpose
Default
Values
Key Required
Example
Purpose
Default (none)
Values (Frame types that are supported by a driver are found in the
driver's LDI file
Key Required No
Example Default IP Frame Type=Ethernet II
Purpose Identifies the network frame type to be bound to the IP stack
when the "Single Network Adapter" is set to True.
Automating the NetWare Installation with a Response File
True
True or False
Yes
Prompt = True
Controls whether the protocols screen is displayed.
False
True or False
No
Single Network Adapter=True
If this key is set to True then in the [NWI:TCPIP] and
[NWI:IPX] sections of the response file the "Logical Name
1" key is automatically filled in with the logical name of the
first network card found in the system. The logical name
will be bound to the TCPIP and IPX addresses specified
in the [NWI:TCPIP] and [NWI:IPX] sections of the
response file.
61