Login - Novell NETWARE 6-DOCUMENTATION Manual

Installing ZENWorks for Desktops 2 Remote Management and Novell Client Software
Version 3.31 on a New Workstation

Login

MFC42.DLL Error
If you have new workstations that require ZENworks for Desktops 2 Remote
Management and Novell Client for Windows 95/98 version 3.31, do one of the
following.
Install Remote Management Using an Application Object
1
Install Novell Client for Windows 95/98 version 3.31 without selecting
Remote Management.
2
Use the NAL Remote-OS Application Object to install Remote
Management.
Install Remote Management Using a Previous Version of the Client
1
Install a previous version of Novell Client for Windows 95/98.
This installs the Remote Management functionality.
2
Install Novell Client for Windows 95/98 version 3.31 without selecting
Remote Management.
Novell Client runs with MFC42.DLL version 4.21.7022 or later. MFC42.DLL
version 6.00.8267.0 is installed when you install Novell Client. If an older
version is installed over the version installed by Novell Client, the client login
fails with an error message similar to the following:
The ordinal 6453 could not be located in the dynamic link
library MFC42.DLL.
The actual message might vary, depending on the version of MFC42.DLL you
are using.
To recover from this error, reinstall the correct version of MFC42.DLL. You
can find the correct file on the ZENworks CD at
D:\PRODUCTS\WIN95\IBM_ENU\MFC42.DLL
Copy the .DLL to the following directory on your workstation:
C:\WINDOWS\SYSTEM
Troubleshooting Issues
99