Workstation-To-Server Connections - Novell NETWARE 6-DOCUMENTATION Manual

Workstation-to-Server Connections

52
NetWare Migration Wizard 6 Aministration Guide
The NDS user that you are using to do the migration has the Supervisor
right to the source server's NDS object. Use ConsoleOne
the NDS object of the NDS user is listed in the source server's Operators
list.
If you have problems establishing or maintaining connections between your
servers and workstations, try one or more of these troublshooting suggestions:
Reboot the client workstation to clear the cache in the Novell
Map a drive to the server instead of logging in. This is especially useful
when connecting with the IPX
Search for the server by its IP or IPX address instead of its name. Enter
the IP or IPX address in the Server field of the Novell Login dialog box.
Try connecting to the server and not the NDS tree by entering only the
name of the server and leaving the tree name and context blank.
Clear all unauthenticated connections. To do this, right-click the N icon
and click NeWare Connections. Detach from all servers and trees that you
are not authenticated to, and then try logging in again.
Make sure your Preferred NetWork Protocol is set correctly by doing the
following:
Right-click the N icon.
Click Novell Client Properties > Protocol Preferences.
Select the desired preferred network protocol and click OK.
Reboot the workstation.
Unbind the protocol you are not using from the destination server. For
example, if you are using IPX for the migration, but IP is bound on the
destination server, unbind the IP protocol on the destination server during
the migration.
protocol.
TM
to verify that
TM
®
Client .
TM