Ipx Dependencies - Novell NETWARE 6-DOCUMENTATION Manual

7

IPX Dependencies

®
If you select TCP/IP as your only protocol during the NetWare 6 installation,
IPX/SPX will no longer be available.
TM
If you have problems loading IPX/SPX-dependent NLM programs, add the
TM
following line after the Server Name in the AUTOEXEC.NCF file:
serverID XXXXXXXX
Replace XXXXXXXX with the internal IPX address you want to assign to
TM
the server. This address can be numbers and letters A, B, C, D, E, F only
(serverID is a hex value).
For example, the serverID line could appear as follows:
serverID 12345abc
For the changes to take effect, you must restart your server after updating the
AUTOEXEC.NCF file.
37
IPX Dependencies