Iprint/Ndps - Novell NETWARE 6-DOCUMENTATION Manual

6

iPrint/NDPS

Installing Printers on Windows NT/2000
To install a printer on Windows NT/2000, you must have Administrator rights
or be a Power User.
Managing iPrint
®
iPrint can be managed with the Novell iManage browser-based management
utility. Not all operations have been included in iManage. For those operations
that you cannot complete in iManage, you can use NetWare Administrator.
For information on setting up iManage, see the Novell iManager
Administration Guide.
IP Address Limitation
When using iPrint, IP addresses must be between 1 and 255 for the Network
ID and Host ID. Addresses that have a 0 (zero) in any of the four octets are not
currently supported. For example, 1.0.0.9 is not supported.
Using NDPS Gateways
®
When you use iManage to create an NDPS Printer object and select the
Novell Gateway, the Novell Gateway (NDPSGW.NLM) is used.
When you use NetWare Administrator to create a Printer object and select the
Novell Gateway, the gateway comprised of PH.NLM and NDPDS.NLM is
used. This is the only version of the gateway that supports RP protocol and
local ports.
To use a third-party print vendor's gateway, you must use NetWare
Administrator to create the NDPS Printer object.
33
iPrint/NDPS