Novell NETWARE 6-DOCUMENTATION Manual page 308

@IncludeFile
@EndIncludeFile
Syntax
@IncludeFile
File: <filename>
[DiskDescription: "...[disk description]..."]
[DiskVolume: 11 char vol name>]
@EndIncludeFile
Description
@IncludeFile specifies a file (<filename>) with additional commands to parse
and execute. DiskDescription specifies the printed name on the media that
shows where the include file is located; DiskVolume is the corresponding
media volume name.
The command file's directory is searched first. If the include file is not there,
the specified disk volume is checked. If <filename> is a <path>\<file>
combination, the command file directory is checked first for <file>, then the
disk volume at the <path> offset is checked. If <file> includes wildcard
characters, all files matching the pattern are included. If the filename has
wildcards but no files match, none are included, and no error results. If the
filename does not have wildcards, and the file is not present, an error occurs.
If the filename is in single quotes and contains %{NWLANG},
%{NWLANG} is replaced by the language number (4=English).
Example
For the NETMAIN.ILS file, where NETMAIN.ICS is not in the same
directory as NETMAIN.ILS:
@IncludeFile
File: NETMAIN.ICS
DiskDescription: '[1]'
DiskVolume: SYSTEM-1
@EndIncludeFile
The file is parsed just after the @EndIncludeFile statement. If the installation
cannot find NETMAIN.ICS in the directory where NETMAIN.ILS is, it
prompts for the CD, then reads and parses NETMAIN.ICS from the CD.
Installation Scripts for NetWare 111