Novell NETWARE 6-DOCUMENTATION Manual page 343

NLMExec
NLMExecIO
Partitions
146 Other Installation Options
Syntax
NLMExec <block flag>, <command line>
Description
NLMExec executes the NLM specified by <command line>. If <block flag>
is 1, NLMExec waits for the NLM to complete execution, then continues.
NLMExec is the external command version of the
NLMExecIO is identical to NLMExec except it executes the command line on
the default DOS server on a NetWare SFT III server. See
page 149 for more information.
Example
NLMExec 1, PINSTALL
This command executes PINSTALL.NLM and waits for it to finish.
Syntax
Partitions <delete flag>
Description
Partitions creates NetWare partitions as needed on all available devices. If
<delete flag> is 1, all existing non bootable partitions will be deleted. If
<delete flag> is 0, they will be left intact. The minimum allowable partition
size is 1 MB, according to default rules (see
Example
For one existing device with a DOS (active) partition and a NetWare 286
partition:
Partitions 1
This deletes the 286 partition and creates a NetWare partition in the remaining
space.
Exec (page 123)
"SetDOSServer" on
"@DeletePartition" on page
command.
105).