External Command Variable Substitution - Novell NETWARE 6-DOCUMENTATION Manual

External Command Variable Substitution

156 Other Installation Options
A variable, such as the value returned by
inside any quoted string within an executed external command. The variable
is global. It goes out of scope only when the command processor is replaced
by a different one. The variable can be dereferenced explicitly by an
expression %{<var name>} within another string.
Variable
NWSERVER
NWSRC
NWDST
NWBOOT
NWLANG
COUNTRY
CODEPAGE
OSTYPE
LOADERTYPE
SERVCONFIGTYPE
SFTLEVEL
OSMAJORVERSION
OSMINORVERSION
OSREVISION
GetPath (page
Description
The name of the server the script is processing on.
Source path where script is found.
Destination path (where server will boot from).
Current path (where server was booted from).
Language number (4 = English, etc.).
Country ID (DOS country specifier).
Codepage number (DOS code page specifier).
NetWare operating system type:
0 - Native
1 - OS/2
2 - SFT III
Type of loader used to start NetWare:
1 - DOS
2 - OS/2
3 - Windows 3.1
NetWare server configuration:
0 - Native
1 - SFT III I/O Engine
2 - SFT III MS Engine
Level of active System Fault Tolerance for NetWare.
The major version number for the NetWare OS.
The minor version number for the NetWare OS.
The revision level for the NetWare OS.
141), can be used